SAB80C517A |
RFQ for SAB80C517A Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| SAB80C517A | - | - | 08+ |
The SAB 80C517A/83C517A-5 is a high-end member of the Siemens SAB 8051 family of microcontrollers. It is designed in Siemens ACMOS technology and based on SAB 8051 architecture. ACMOS is a technology which combines high-speed and density characteristics with low-power consumption or dissipation.
While maintaining all the SAB 80C517 features and operating characteristics the SAB 80C517A is expanded in its "fail-safe" characteristics and timer capabilities.The SAB 80C517A is identical with the SAB 83C517A-5 except that it lacks the on-chip program memory. The SAB 80C517A/83C517A-5 is supplied in a 84-pin plastic leaded chip carrier package (P-LCC-84) and in a 100-pin plastic quad flat package (P-MQFP-100-2).
Features |
| `SAB 80C517A/83C517A-5, up to 18 MHz operation`32 K *8 ROM (SAB 83C517A-5 only, ROM-Protection available)`256 *8 on-chip RAM`2 K *8 on-chip RAM (XRAM)`Superset of SAB 80C51 architecture: 1ms instruction cycle time at 12 MHz 666 ns instruction cycle time at 18 MHz 256 directly addressable bits Boolean processor 64 Kbyte external data and program memory addressing`Four 16-bit timer/counters`Powerful 16-bit compare/capture unit (CCU) with up to 21 high-speed or PWM output channels and 5 capture inputs`Versatile "fail-safe" provisions`Fast 32-bit division, 16-bit multiplication, 32-bit normalize and shift by peripheral MUL/DIV unit (MDU)`Eight data pointers for external memory addressing`Seventeen interrupt vectors, four priority levels selectable`Genuine 10-bit A/D converter with 12 multiplexed inputs`Two full duplex serial interfaces with programmable Baudrate-Generators`Fully upward compatible with SAB 80C515, SAB 80C517, SAB 80C515A`Extended power saving mode`Fast Power-On Reset`Nine ports: 56 I/O lines, 12 input lines`Three temperature ranges available: 0 to 70 (T1) |
Ambient temperature under bias........................................................... 40 to 110° C
Storage temperature ............................................................................... 65 to 150
Voltage on VCC pins with respect to ground (VSS) ................................ 0.5 V to 6.5 V
Voltage on any pin with respect to ground (VSS) ........................... 0.5 to VCC +0.5 V
Input current on any pin during overload condition ............................ 10mA to +10mA
Absolute sum of all input currents during overload condition............................. |100mA|
Power dissipation .................................................................................................... 1 W
Note Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage of the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for longer periods may affect device reliability. During overload conditions (VIN > VCC or V IN < VSS) theVoltage on VCC pins with respect to ground (VSS ) must not exeed the values definded by the absolute maximum ratings.
